Case Studies
Land, air defence, rocket platform and lighting programmes — customer context, challenge, TEDEG solution and outcome.
Customer names are withheld for confidentiality; projects are described at programme level.
Land Platforms · 2024
An ageing PDU that could no longer keep pace with growing mission loads was replaced by a remotely monitored power distribution architecture built on the PDU-RT5002 and designed to MIL-STD requirements.
Read case study
Air Defence · 2025
A motor drive and a frequency converter sourced from separate foreign suppliers were replaced by a matched TEDEG pair, designed together so that neither interferes with the other.
Read case study
Lighting Systems · 2024
Supplier transitionA competitor's spotlight that kept failing in the field was replaced by a domestic design with a sealed enclosure, a reworked motion system and LED electronics.
Read case study
Land — Rocket / Missile Platforms · 2025
The outdoor-rated military 60 Hz and 400 Hz solution the manufacturer could not find on the market: a single PowerGuard Outdoor replaced three systems combined in an industrial enclosure.
Read case study
Land Platforms · 2025
Instead of a separate imported smoke system for every vehicle variant, one domestic system whose launcher count and coverage are chosen per variant and which joins the vehicle data bus over J1939.
Read case study
Missile and Air Defence Radar Systems · 2025
For the low-power-factor radar and fire-control loads that make commercial UPS units and converters alarm and shut down, a domestic pair built around a control algorithm and power stage designed for capacitive load.
Read case study
Tactical Wheeled Vehicles · 2026
For a situational awareness suite that fed its cameras, mission computer, operator display and seat module from separate supplies, the SENTRA KBM camera power distribution module, built around the customer’s Technical Requirements Document and ICD.
Read case study
Command and Control (C4I) Systems · 2025
For a mobile command-and-control container whose rack cabinets had only 2U left for power distribution, the PowerGuard PDU-R2D4: mains and UPS on separate inputs, with every output managed in software.
Read case studyOur engineering team provides a technical pre-assessment within 24 hours.
